Feltex QuickFit™ technology is a revolutionary new backing for carpet tiles. Feltex QuickFit™ tile flooring is able to be installed easily and quickly and in most cases requires no sealant and adhesives.
Installation time reduced
Installation time is significantly reduced compared to other adhesive installation systems – simply lay the tile straight down onto clean and dry subfloors.
No Primer or Sealant
No need to prime or seal subfloors.
Little or No Residue
Little or no residue, resulting in less chance of damage to access and high quality floors.
More cost effective than traditional adhesive installation procedures that require primers and sealants.
Wait no more
No more waiting for wet adhesive to tack-off.
Easy repositioning or removal
Repositioning or removal of laid tiles later is simple and easy.
No loss of adhesion
Lift and replace tiles 2-3 times without any loss of effective adhesion.
Absence of PVC means off-gassing odours associated with floor sealants and adhesives are eliminated.
Suitable for most commercial facilities
Feltex QuickFit™ technology is a revolutionary new backing for carpet tiles. Feltex QuickFitTM tile flooring is able to be installed easily and quickly and in most cases requires no sealants and adhesives.
Performing well in areas with normal foot traffic and light to medium wheeled traffic, Feltex QuickFit™ tile is ideal for offices, retail outlets, institutions and public spaces. Subject to proper installation over a suitable subfloor, Feltex QuickFit™ tiles are suitable for most commercial facilities.
Limitations in the use of Feltex QuickFit™ tiles
- In facilities where walls are not flush with the subfloor and areas subject to heavy rolling traffic or on inclined flooring, these areas will require the supplementary use of adhesive or double sided tape.
- Adhesive or double sided tape is also required for tiles that have been cut down to less than 300 mm in size, in accordance with Feltex’s installation instructions.
- Feltex QuickFit™ is not designed for use on stairs.
- Feltex QuickFit™ is not designed for use in areas subject to moisture exposure.
NOTE: All installations should be assessed by a professional installation contractor to determine whether and how Feltex QuickFit™ tile should be utilised to best suit customer requirements and completed in accordance with the Feltex QuickFit™ installation instructions. Not recommended or warranted for use over underlay.